VIBRATING
MACHINE & TABLE
VIBRATING MACHINE IS 4031 -1968
(MOULD VIBRATOR OR CUBE VIBRATOR)
Vibrating
machine is used for the preparation of mortar cube for
the determination of compression strength of ordinary
and repair hardening Portland cement, low heat Portland
cement.
SPECIFICATION : The complete frame assembly
consists of avice to hold a 7.06 cm cube mould to feed
the sample in the mould. The frequency of vibration
ois 12000 +- 400 R.P.M Vibration per minute supplied
complete with one 7.06 cm cube mould . with time switch
electric 0-5; minute operating current starts when dial
knob is turned to any desired time and automatically
cuts off when knob returns to zero.
VIBRATING
TABLE: OPEN BODY:
(fitted with 3 phase , 440 volts 3 phase
The vibrating table used for compacting concrete cubes
and cylinders.
SPECIFICATION : It is designed to carry a load
of 140 K.G. The table top is 50 cm x 50 cm (20"
x 20") and has stops along its edges to prevent
mould from working off the table during vibration. A
cross arm adjustable on a vertical rod at the centre
of the table is provided to hold the mould while operating
the table. The variable pitch pulley arrangment permit
the frequency to be varied steplessly between a maximum
of 3600 vibration per minute approximately.