SIEVE
SHAKER & TEST SIEVES
|
|
| |
|
|
 |
|
|
| |
|
|
| ROTAP
SIEVE SHAKER |
|
|
Heavy duty(Improved Model ) FOR 8 ",12" &
18" TEST SIEVES
The Rotap Sieve shaker
is durably constructed and is run by ¼ H.P. Electric
MOTOR 220 Volts A.C through reduction gear. Designed to
carry upto 6/7 TEST SIEVES of 200 mm Dia (8") with
one set lid & pan. It reproduces circular and hammering
motion is given at top . it reproduce Circular (revolution
approx.: 280 to 320 R.P.M and tapping approx.: 140 R.P.M
to 160 R.P.M No foundations are required
(with timer /without timer)
 |
|
|
| |
|
|
| GYRATORY
SIEVE SHAKER |
|
|
(Improved Model ) FOR 8
",12" & 18" TEST SIEVES
Gyratory Sieve Shaker is
driven by ¼ H.P. Electricx motor through a reduction
gear, can carry upto SIX , 6" OR 8" /12"
/18" Test Sieves with one set of LID AND Pan .
This Gyratory motion of the table there is an upward
and downward movement but is inclined from the vertical
axis and the direction or inclination charges progressively
in clockwise direction having frequency of about 270
vibration per minutes. Unit having six Stainless Steel
needles fixed on Stainless Steel pipe of approx 12.5
mm dia with side water tap. Tank made of Stainless Steel.
(with timer /without timer)
 |
|
|
| |
|
|
| TABLE
SIEVE SHAKER |
|
|
(FOR 8" & 12"
TEST SIEVES)
(Soundless , Vibration type)
Fitted with F.H.P Electric
Motor. It can accommodate 6 Test sieves of 8" Dai
with Lid and pan. Speed can be regulated through variable
speed regulator to work on 220 volts A.C (without Test
Sieves) speed regulator to work on 220 volts A.C
 |
|
|
| |
|
|
| TEST
SIEVES |
|
|
200MM DIA / 300 MM DIA /450 MM DIA
(According to IS :
460 -1962 :
Test Sieves Brass made out of rolled Bras, Spun Body Frame
without joint/G.I SHEET FRAME . Folded bottom having beading
at top, tight fitting with each other : Mounted with Stainless
Steel cloth . Finished as per BSS/ASTM/ISS/MICRONS (specification
required by the customers)
